GLL Lighting Fixture
BARTEC F.N. has recently launched its new GRP linear LED lighting fixture.
Lighting fixture type GLL is a GRP linear LED luminaire.
It is an explosion protected item intended for use in surface industries (group IIC and IIIC), in areas where, during the normal activities, explosive atmospheres caused by gases, vapours, mists and/or air/dust mixtures are likely to occur. It has been designed to be capable of functioning in conformity with the operational parameters and ensures a high level of protection. It is used to illuminate operating and storage facilities in potentially explosive areas, and may be deployed in Zones 1, 2 as well as 21 and 22.
The luminaire with type of protection "Ex db eb mb tb" is available in a 2-strip LED version. For the electrical connection, three holes are provided to house the cable glands or blanking plugs, approved for the explosion protected area ("Ex eb" - M25x1.5), whereby two of these holes are sealed with blanking plugs in the factory. As standard, the luminaire is designed for internal throughwiring.
The electrical connection of entry and exit lines is possible on opposite sides. Diverse mounting accessories make it possible to install the luminaire with wall or ceiling mounting, pole mounting or pendant mounting.
It is an explosion protected item intended for use in surface industries (group IIC and IIIC), in areas where, during the normal activities, explosive atmospheres caused by gases, vapours, mists and/or air/dust mixtures are likely to occur. It has been designed to be capable of functioning in conformity with the operational parameters and ensures a high level of protection. It is used to illuminate operating and storage facilities in potentially explosive areas, and may be deployed in Zones 1, 2 as well as 21 and 22.
The luminaire with type of protection "Ex db eb mb tb" is available in a 2-strip LED version. For the electrical connection, three holes are provided to house the cable glands or blanking plugs, approved for the explosion protected area ("Ex eb" - M25x1.5), whereby two of these holes are sealed with blanking plugs in the factory. As standard, the luminaire is designed for internal throughwiring.
The electrical connection of entry and exit lines is possible on opposite sides. Diverse mounting accessories make it possible to install the luminaire with wall or ceiling mounting, pole mounting or pendant mounting.
Settori: Illuminotecnica, LED
Mercati: Sicurezza industriale
Parole chiave: LED
- Rometec
- Stefano Bonelli
- Patlite Europe Gmbh
- Nicola Miola